3point carryall-manufacture,factory,supplier from China

(Total 24 Products for 3point carryall)
CY series carryall is the multifunctional transporting tool, which is Perfect for transporting water & diesel tanks,chainsaws, toolboxes, stock feed, small tanks, hay, hoses, generators and so on.
  Связаться сейчас
CY series carryall is the multifunctional transporting tool, which is Perfect for transporting water & diesel tanks,chainsaws, toolboxes, stock feed, small tanks, hay, hoses, generators and so on.
  Связаться сейчас
CY series carryall is the multifunctional transporting tool, which is Perfect for transporting water & diesel tanks,chainsaws, toolboxes, stock feed, small tanks, hay, hoses, generators and so on.
  Связаться сейчас
CY series carryall is the multifunctional transporting tool, which is Perfect for transporting water & diesel tanks,chainsaws, toolboxes, stock feed, small tanks, hay, hoses, generators and so on.
  Связаться сейчас
CY series carryall is the multifunctional transporting tool, which is Perfect for transporting water & diesel tanks,chainsaws, toolboxes, stock feed, small tanks, hay, hoses, generators and so on.
  Связаться сейчас
CY series carryall is the multifunctional transporting tool, which is Perfect for transporting water & diesel tanks,chainsaws, toolboxes, stock feed, small tanks, hay, hoses, generators and so on.
  Связаться сейчас
4U series of sweet potato harvester is mounted with the tractor of 12-60hp with back power and side power output shaft. Our tractor potato harvester is intended for potato excavation , tubers partial separation from the soil and tubers laying on field surface for their further picking up. A triangular beater is set on the potato harvester. The working principle of this potato digger is that the digging shovel digs up the soil and crops through the impetus of the tractor.
  Связаться сейчас
9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting operations after mowing. The implement adopts a hydraulic overturning mechanism and spring steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic overturning mechanism so as to realize the offloading of the hay.      ModelUnit9GL-1.49GL-1.69GL-1.89GL-2.1Working widthmm1400160018002100Total weightkg9095100110Matched powerhp15-30Linkage2 point to support ,   tipping single action oil cylinder oil connection in 1/2”thread
  Связаться сейчас
Model 9G series of sickle bar mower takes advantage of the offset crank link mechanism to drive the cutter blade mow grass, and it is adequate for cutting the natural and planted grasses in ranch, mountain and hilly area. The structure of this machine is compact and the operation is easy and reliable and the residues is lower after cutting.Modelunit   9G-1.49G-1.69G-1.89G-2.1Working widthmm1400160018002100Working depthmm50-80PTO Rotation speedr/min540PTO shaft  spline6 splineTotal weightkg120124128135Matched powerhp12-2015-2020-3020-30LinkageThree-point suspension   I type
  Связаться сейчас
Model 9G series of sickle bar mower takes advantage of the offset crank link mechanism to drive the cutter blade mow grass, and it is adequate for cutting the natural and planted grasses in ranch, mountain and hilly area. The structure of this machine is compact and the operation is easy and reliable and the residues is lower after cutting.Modelunit9G-1.49G-1.69G-1.89G-2.1Working widthmm1400160018002100Working depthmm50-80PTO Rotation speedr/min540PTO shaft  spline6 splineTotal weightkg120124128135Matched powerhp12-2015-2020-3020-30LinkageThree-point suspension   I type
  Связаться сейчас
This kinds of double axle farm trailer is used for 25-120hp 4-wheels tractor , Applicable for transporting various bulk cargoes in plains, mountains, wetlands, knap, rural area and highway ,with the feature of solid structure; beautiful, safe, reliable, durable.
  Связаться сейчас
Disc plough is matched with four-wheel tractor, the discs of plough are revolving to furrow the land during operation.. The mounted disc plow is especially suitable for land which have weeds, stems and frictional soil with small brick etc.Modelunit1LYX-2301LYX-3301LYX-4301LYX-530Working widthmm60090012001500Working depthmm250~300Q’ ty of disc2345Total weightkg300440490550Matched powerhp4060100130LinkageThree-point suspension II type
  Связаться сейчас
Disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.It can be used as tillage machine instead of plow on the cultivated land.
  Связаться сейчас
1)Wet cylinderThe location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture).
  Связаться сейчас
Install bridge bearings on the half shaft to attenuate vibration and protect the half shaft and other components.The half shaft (drive shaft) is subjected to alternating stresses such as torsion, shear, tension and compression, and impact, which can also cause torsional and bending vibrations of the drive shaft, resulting in additional stresses; Uneven stress distribution; There is sliding friction between the drive shaft neck and the bearing.The shaft that transfers torque between the half shaft gearbox reducer and the drive wheel (previously mostly solid, but due to the easier control of une
  Связаться сейчас
Disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened soil and return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.It can be used as tillage machine instead of plow on the cultivated land.
  Связаться сейчас
Disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened soil and return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.It can be used as tillage machine instead of plow on the cultivated land. With the efficient productivity, reasonable utilization of the power, great ability of cutting and shattering the soil , the soil surface is smooth and loosening after harrowing, it is well suitable for heavy clay soil, waste land and weedy field as well.
  Связаться сейчас
1BJ series trailed folding wing Medium disc harrow  is mainly applicable to clean the crop residue before tillage, break the hardened and level the soil surface, crush and spread straw into the field, shatter soil after tillage, and level the land prepare the soil seedbed for planting.
  Связаться сейчас
3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating, ditching, riding, deep loosing, etc. The rotary cultivator can break the harden soil, loose soil, and keep the underground water of soil, and clean the stubble of crop. This cultivating machine  is rational structure. It is safe, durable, and high efficiency. Modelunit3Z-23Z-33Z-43Z-5Working widthmm1100190029003700Working depthmm100-200No.
  Связаться сейчас
1GQN series of rotary tiller is adopted middle gear transmission system, mounted with the tractor though the 3 point  suspension Tractor’s wheel tracks are completely covered after tillage as the working width is much wider. The quality is reliable and the performance is well.  This cultivator can be used on dry and paddy field. It can reduce the time, laboring, and cost, etc.ModelUnit1GQN-100125140150160180200220250300Working widthmm1000125014001500160018002000220025003000Working depthmm120-180 PTO Rotation speed r/min540-720 PTO shaft  spline 6 splineNo.
  Связаться сейчас
Disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened a break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.This tractor disc harrow can be used as tillage machine instead of plow on the cultivated land. With the efficient productivity, reasonable utilization of the power, great ability of cutting and shattering the soil , the soil surface is smooth and loosening after harrowing, it is well suitable for heavy clay soil, waste land and weedy field as well.
  Связаться сейчас
Model1LS-215Power12-18hp walking tractorPloughing width (cm)40Ploughing depth (cm)12-18Number of disc2Net Weight40KGS
  Связаться сейчас
1L series  share plow is a four-wheel tractor mounted plow, mainly used for plowing loam, the sand loam , cultivated and dry land.Modelunits1L-2201L-3201L-4201L-5201L-2251L-3251L-4251L-525Working widthmm400600800100050075010001250Working depthmm200~250Number of bottoms23452345Total weightkg64100130170125170240270Matched powerhp15~2525~3535~4550~6025405065LinkageThree-point I suspension typeThree-point suspension II typeThree-point suspension I typeThree-point suspension II typeModelunits1L-3301L-4301L-5301L-3351L-4351L-535Working widthmm90012001500105014001750Working d
  Связаться сейчас
Relate News
Potato harvesters are a outstanding manner to store guide labour throughout potato harvest. Before the discovery of the potato harvester, maximum human beings dug their potatoes from the floor the use of a fork or a spade. Then they lifted the potatoes from the floor and positioned them right into a basket earlier than tipping them right into a hessian fabric bag to be stored. Potatoes are commonly grown in drills or beds, this facilitates the harvester dig a good width of soil and potatoes because it movements alongside the field.
I. Adjustment of tillage depth of deep ploughing plough:Generally speaking, the tillage depth of deep ploughs should not be less than 10cm. Rotary tiller matched with walking tractor can adjust the depth of cultivated land by changing the height of tail wheel. When adjusting, just turn the adjusting handle.The ploughing depth is controlled by the hydraulic system of the deep ploughing machine matched with the wheeled tractor.
1. At the beginning of the work, the Rototiller should be in the state of lifting, first combined with the power output shaft, so that the rotation speed of the cutter shaft increased to the rated speed, and then decreased the Rototiller, so that the blade gradually buried to the required depth. It is forbidden to combine the blade with the power output shaft or down the Rototiller after the blade is buried, so as not to cause the blade to bend or break and increase the load of the tractor. 2.
The working part is a Rotary Tiller with 2 ~ 3 spiral cutters. During the operation, the Rotary Tiller rotates around the vertical axis and the cutter cuts the soil into pieces. The utility model is suitable for paddy field hydroponic cultivation, and has strong soil crushing and pulp action, but poor covering performance. Used more in Japan. In order to enhance the effect of Rototiller, various additional devices have been installed on the rototiller in some countries.
Rotary tillage part is the most commonly used tillage part of micro-tiller, and the engine power drives the rotary tillage cutter shaft to rotate through the transmission device. Rotary tillage knife shaft is horizontally arranged, and several rotary tillage blades are arranged on the circumference of the knife shaft. The transmission of the knife shaft has two forms: middle transmission and side transmission.
This 3QL series agriculture machinery furrow ridger machine tractor ridger is suitable for ridging after the tillage in the farm field. It consists of heavy duty tubular box frame, the whole machine is made much stronger than regular ones. This ridger is suitable for ridging after the tillage in the field for potato, beans, vegetable etc. It is convenient to adjust the ridging height and the ridging rows and space between each ridge. It can be easily spaced (widened or narrowed) according to the crop requirement. The rubber tires can be moved easily.
 5TY Series Corn Thresher, when working, the corn is fed by the feed mouth, the corn is hit in the high speed rotating rotor and the drum, the kernel is separated by the sieve hole, the corn core is discharged from the tail of the machine, the corn silk, the skin is discharged from the tuyere. The feed hole is arranged on the upper cover of the machine. The corn stick enters the threshing chamber through the feed hole. The corn grains are knocked off by the high-speed rotating rotor in the threshing chamber and separated through the sieve holes.
This 3QL series agriculture equipment furrow ridger gadget tractor ridger is suitable for ridging after the tillage in the farm area. It includes heavy duty tubular field body, the complete device is made a lot stronger than everyday ones. This ridger is suitable for ridging after the tillage inside the field for potato, beans, vegetable etc.It is convenient to regulate the ridging top and the ridging rows and space between every ridge. It could be effortlessly spaced (widened or narrowed) consistent with the crop requirement. The rubber tires may be moved without problems.
Supplying high quality harrow and plough's spare parts, including discs, hubs, bearings, spacers, harrow shafts etc. We can also customize the parts according to sample or drawing. 
What is a disc plough used for?The disc plough is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily at rocky and rooted areas.