bearing-manufacture,factory,supplier from China

Install bridge bearings on the half shaft to attenuate vibration and protect the half shaft and other components.The half shaft (drive shaft) is subjected to alternating stresses such as torsion, shear, tension and compression, and impact, which can also cause torsional and bending vibrations of the drive shaft, resulting in additional stresses; Uneven stress distribution; There is sliding friction between the drive shaft neck and the bearing.The shaft that transfers torque between the half shaft gearbox reducer and the drive wheel (previously mostly solid, but due to the easier control of une

Product descriptions from the supplierOverview            Agricultural machine parts disc harrow bearing house brazil bearing assembly          Product DescriptionDuo-Cone mechanical seals.Taper roller bearings to absorb load in two ways - axial & radial.Low maintenance.Long life span.Total length 178-248mm, Weight 12-24kg

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

Agricultural Disc Harrow Oil bathed bearing assembly  PRODUCT OVERVIEW   

Product descriptions from the supplier:PRODUCT DESCRIPTION:The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

ItemHSTAY6075Working   width7500mmWorking   depth250-300mmNo. of   discs60 pcsDisc   dimension660*6mmBearing Bearing assembly type， 中孔43， 圆轴42Total   weight6100kgMatched tractor   power240hpLinkage Trailed

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

Disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened soil and return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.It can be used as tillage machine instead of plow on the cultivated land. With the efficient productivity, reasonable utilization of the power, great ability of cutting and shattering the soil , the soil surface is smooth and loosening after harrowing, it is well suitable for heavy clay soil, waste land and weedy field as well.

PRODUCT DESCRIPTION                                                Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc. which are exported to more than 70 countries of America, Thailand, Bolivia, Chile, Peru, Australia, South Africa, Tanzania, Nigeria, Ghana, Sudan, Botswana, Zambia, Zimbabwe etc.

Strongest harrow machine heavy duty offset disc harrow  pull  type disc harrow Product DescriptionThis LCBB heavy duty offset disc harrow is designed according to the Europe standard.It adopts the features on hydraulic offset modular structure, built-bearing composite design, reasonable structure, bearing seal, long life, durable, easy to transport, easy to adjust, easy maintenance .This heavy duty offset disc harrow also can be used to clean the stubble before tillage ,  break the hardened and impervious soil surface, crush and spread straw into the field, shatter soil aft

Product descriptions from the supplierOverview Disc Harrow Spare Parts Disc Blade Boron Disc 26inch 28inch Notched Harrow blade    PRODUCT DESCRIPTION                                              Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc.

LCBB series of heavy duty disc harrow was designed according to the Europe standard .It adopts the features on hydraulic offset modular structure,built-bearing composite design,reasonable structure, bearing seal, long life, durable, easy to transport, easy to adjust, easy maintenance.This heavy duty harrow also can be used to clean the stubble before tillage,break the hardened and impervious soil surface,crush and spread straw into the field, shatter soil after tillage, and level the land and preserve soil moisture.

3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement.ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension II type

this rear mounted rotary mower is added the chain in the front and rear of the tractor rotary slasher to protect the worker. Driven by the 3 gear boxes to keep widely working width.

Disc plough is matched with four-wheel tractor, the discs of plough are revolving to furrow the land during operation.. The mounted disc plow is especially suitable for land which have weeds, stems and frictional soil with small brick etc .Modelunit1LYX-2301LYX-3301LYX-4301LYX-530Working   widthmm60090012001500Working   depthmm250~300Q’ ty of   disc2345Total   weightkg300440490550Matched   powerhp4060100130LinkageThree-point   suspension II type

This mounted land scraper is a farm implements that uses the scraper which fitted between the front and back rear wheels to unknit land, the scraper can be lifted, sloped, revolved and extended.this machine is  Flexible and accurate, easy to use; applicable for constructing the roadbed and road surface, ditching the side slope, mixing road mixtures, removing snow, transporting grain materials and maintaining the dirt roads and gravel roads, etc.

this rear mounted rotary mower is the updated version from the type 9GX series.we add the chain in the front and rear of the tractor rotary slasher to protect the worker.

1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working   widthmm90012001500105014001750Working   depthmm220-270Number of   bottoms68106810Total   weightkg5807509506208001000Matched   powerhp507080557590LinkageThree-point   suspension II type ,hydraulic output(difunctional oil cylinder),oil   connection in 1/2” thread

1BQD Series Opposed disc harrow is mainly for the cleaning stubble before tillage,breaking the hardened surface ,soil pulverization and leveling   ModelUnit1BQD-1.61BQD-2.01BQD-2.4Working widthmm160020002400Working depthmm140Q’ty of disc162024Total weightkg460490520  Matched   powerhp304050-60LinkageThree-point suspension   I typeThree-point suspension   II type

This mounted land scraper is a farm implements that uses the scraper which fitted between the front and back rear wheels to unknit land, the scraper can be lifted, sloped, revolved and extended.this machine is  Flexible and accurate, easy to use; applicable for constructing the roadbed and road surface, ditching the side slope, mixing road mixtures, removing snow, transporting grain materials and maintaining the dirt roads and gravel roads, etc.